#Style cmmts

-add pleat on cuffseam at 2cm from the slitplacket at frontside on the slv, pleat depth of 1.5cm

-end of the roll-up strap should be made with an arrow point , not rectangular end

-collar points NOT round , make straight points as in order 64853

-elbow patch is missing

 

#Fabric cmmts

-all fabric and colours available

 

#Acc cmmts

-rib is pilling

-use nylon spiral zip

-button down buttons must be smaller size than the buttons on CF

-add fusing in the shoulder placket

-fusing interlining

-collar must be in knitting quality, not selffabric

-rib in neck is too big , make smaller , stick to spec

-use black elastic in the waist

-cancel necktape herringbone

 

#Lable cmmts

-

 

#Fitting cmmts

-chest/waist/bottom should have same msm, not going smaller on bottom

-neck stretched is only 26cm, need minimum 26.5cm.

-knee width to become    17   17.5   18   18.75  19.5  20.25  21

 

#Finishing cmmts

-the 2 shoulders have a difference in length of 1cm,both shoulder must have same length

-shoulder drop not the same left and right

-armhole curved 1cm too big

-add diaonal double stitching on the fake fly to re-inforce the opening , because now when pulling the waist the stitching on the fly breaks

-the 2 ends of the adjustable elastic must be fixed on the inside of the waistband with a stitching!!!

-inseam is standing bolt , should be straight

-detachable hood:placket around neck with the snappers should come more towards the CF, add on each side 2.5cm length on the placket and place the first snapbutton also more towards the CF==èthis will made the hood more closed which is better for babies

-on placket in CF,add 1 more button on the bottom to close the placket nicely at the bottom , buttons are placed too close next to the zipper , this is too difficult to close the buttons